Jabbit Sluice Stand
The patented Jabbit sluice stand is the only deep water, self-driving stake with solid steel construction available. It can be used with many brands, sizes and widths of sluice boxes. To use it, just "Jabb-it" into the sediment, slide on the "T-bar" to stabilize the bottom of your sluice box
,attach your sluice to the "sluice box bar", slide your sluice box onto the stand and adjust foryour desired height in the water. The Jabbit sluice stand can be submerged into depths of up to 30 inches of water. Your sluice box will float effortlessly with its weathervaneaction in the current and stay in place without any extra rock stabilization. When you are ready to empty your material, just slide your sluice box off, empty it, and slide it back on. You're sluicing again in minutes. When yourdone sluicing, the self-driving stake is built with angritted handle and inner sleeve, so with a reverse pull up, it will then extract itself from the sediment.
The "Jabbit" shown here is holding a sluice box. The driving stake is a self-pounding
stakethat can be set in up to 30 inches of water. The sluice box bar is a bracket that attaches to your sluice box and allows you to mount it on the driving stake. It is adjustable to fit many widths of sluice boxes. To attach your sluice box, drill holes in your sluice box and secure it with the provided bolts and nuts. The T-bar sits below your sluice box to support it and keep it from dipping down in the water. The yellow L-rods on the T-bar do not need to fit tightly against or be attached to your sluice box. They are there to help you locate the T-bar in the water while placing your sluice box on the driving stake. Jabbitsluice box stand firmly holding a sluice box in deep, fast moving water.